Sulphur Mortar
Sulphur Mortar
Sulphur Mortar is a hot-pour, plasticized sulfur base compound, mainly used with acid resisting bricks to protect floors, pickling tanks, sumps etc. Sulphur mortar is used with acid resistant brick and tile to protect storage tanks, floors, drains, sumps, pits, pickling tanks in steel & electro plating industries, tube mills etc.
Method Of Application
Break the MICRO -S bricks into very small pieces and place in clean, dry heating pan. Start melting it with slow heating and stir it while heating until you get free flowing smooth liquid. Then pour between the joints of acid resistance bricks/tiles. Avoid air pocketing while filling the joints.
Chemical Resistance
Against non-oxidizing acids, diluted oxidizing acids and acidic and neutral salts at recommended temperature. It is not recommended for use against alkalis, Hydrofluoric acid, fluoride salts etc. For this, 100 % carbon filled MIPRO-S”C” is available.
Physical Property
|
|
|
|---|---|
|
Color
|
Black
|
|
Mix Ratio by wt. Sol to Pow
|
Hot Melt
|
|
Flexural Strength kg/cm2
|
70
|
|
Bond Strength kg/cm2
|
5
|
|
Water Absorption
|
1%
|
|
Max. Temp
|
90° C
|
|
Setting Time In Hours
|
2 Hrs.
|
It is advisable to wear protective wears at the time of use of Sulphur mortar and any other Sulphur mortar brand products. Provide adequate ventilation while melting. Handle with care when hot. In case of inhalation of fumes, remove person to fresh air. In case of contact with skin or eyes, contact a doctor immediately. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Storage & Shelf Life
Always keep sulphur mortar away from direct heat and in dry place. It can be stored like this, for unlimited period.